This 4-inch air tight housing is suitable for new construction applications. Air tight housings increase energy savings by restricting the transfer of conditioned air to the plenum above the fixture. This housing is not rated for direct contact with thermal insulation and requires a 3" minimum clearance. Two bar hangers included.
Compatible with retrofit LED modules and a wide selection of Nora trims, the 4-inch Air-Tight Line Voltage New Construction Housing accepts 120V supply voltage and can install in plaster or drywall ceilings. Equipped with a medium E26 socket, the housing is 5 3/4 inches high with a 4-inch aperture and a ceiling cutout of 4 3/8 inches. Ideal for R/PAR20, PAR16 light bulbs or 4” LED retrofit trims, it has been wet location listed and comes with a one-year warranty from Nora. Pre-installed gaskets are included in the housing so that airflow is restricted from the room into the ceiling plenum. Bar hangers are adjustable from 13-5/8 inches to 24-1/2 inches and can be repositioned 90 degrees.
Requires LED retrofit module (or lamp and trim).