The Trulux DMX Receiver allows the Trulux tape light to operate in a DMX universe, receiving the data from a DMX controller and decoding it so that the tape light performs as desired. Attach the power supply to the primary side and the Trulux tape light to the secondary side. DMX data cabling (not included) will need to be hardwired to the receiver in order to connect it to the DMX universe.
This receiver is designed for Tunable White and RGB(W)Trulux tape light. It can be controlled either by a Trulux DMX controller or a third-party DMX controller.
Up to 5A capacity of tape light (60 watts for 12V, 120 watts for 24V) can be connected to each of the 4 circuits on the secondary side. Each circuit will be one address/channel.